The Making of a Princess Sign

DSC00002

I wanted to do something that combined my Crocheting and Wood together so I thought I would share my project of a hanging sign. I started with a piece of solid pine. It can be any size you want.  This piece happens to be approx 7″ wide, 3″ tall and 1/4″ thick.  I got these from Ben Franklin in a pkg. You can get these at any Craft Store.

DSC00005

Next I painted the pieces with Acrylic Paint.  I put a couple coats of paint on to cover the wood. You can find Acrylic Paint anywhere you find craft supplies. After the paint dried I used a 1/8″ drill bit to drill holes where I wanted the Ribbon or Twine to attach to the sign.

DSC00010

I wanted to find an easy way to get the lettering onto the sign. I had used Stencils and did not like using them, so I searched on the internet and found this Come Together Kids: How to do Custom Lettering without a Fancy Machine. I was so excited to find a simple and easy way to transfer lettering.  You will need word processing software. Print up lettering in any size you want to fit the sign.  I have a few examples in the picture above.

DSC00016DSC00019

Here I used a drawing graphite pencil but it will also work with a regular pencil.  I cut the lettering out the way I wanted it to appear on the sign. You want to flip the paper over and use the pencil to color over the entire lettering. You do not have to color the whole back of the paper just lettering.

DSC00023DSC00030

After coloring the back of the saying I placed it on the sign and taped it down so it would not move while working on it.  I then took a pencil and traced around the lettering to transfer it onto the sign.

DSC00041

Sorry the picture did not turn out real clear but you can get the picture that it does transfer the lettering onto the wood.  I then proceed to outline with the paint and fill in the lettering. Here is a finished Sign Below!

DSC00049DSC00065 (2)

As you can see I I cut out the letters for this sign.  I glued the Crocheted Butterflies onto the sign. You can use anything you want to dress it up! If you feel inclined to you can paint a little butterfly, flower or anything you want on the sign. I cut some 1/8″ Ribbon out and ran it through the drilled holes from the back to the front. I then knotted the ends and cut off any extra. You now have a sign for hanging.

Hope you have fun with this project! If you have any questions feel free to ask 🙂

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s